How do I set up USB (Type C) dell universal docks?

PART I: SETTING UP THE UNIVERSAL DOCK
 

1. Open box and remove contents from box – There should be three components (Power Supply Cord, Dell Universal Dock, and Power Supply Box)
   
   
    
2. Remove the Power Supply Box from the white box that it came in and remove the plastic bag from the Power Supply Cord – unwrap all cords
    
3. Insert the side that has 3 circles in a shape of an upside-down triangle (3 prong side) of the Power Supply Cord into the corresponding 3 prong side of the Power Supply Box
   
   
    
4. Insert the other end of the Power Supply Cord into the wall or a surge protector
   
   
    
5. Take the Dell Universal Dock out of the packaging and unwrap the plastic from it
    
6. Using the pre-attached cord from the Power Supply Box (The end looks like a circle), insert it into corresponding side of the Dell Universal Dock
   
   
    
7. Using the pre-attached cord on the other side of the Dell Universal Dock, release the USB (Type C) by pulling it out – See below
   
   
    
8. Insert the USB (Type C) into your laptop
   
   
    

CONNECTING ETHERNET CORDS TO UNIVERSAL DOCK
 

The Ethernet Cord has clear plastic ends to each cord.

1. Connect one end of the Ethernet Cord to the Power Supply Box
   
   
    
2. Connect the other end of the Ethernet Cord to the Ethernet Port in the wall
   
   

Part II: CONNECTING UNIVERSAL DOCK TO LAPTOP
 

VGA CORD
If your cord looks like the one below, you have a VGA Cord. You will need an additional adapter to connect the universal dock and it will be sent to you. Follow the corresponding steps:

1. Remove the additional adapter and the additional cords out of the bag – they should look like the ones below
   
   
    
2. Insert one end of the VGA cord into the empty side of the adapter (A rectangle with holes)
   
   
    
3. Insert the other end of the VGA Cord into the back of your monitor
   
   
    
4. Insert the additional cord adapter into the adapter (Smaller side)
   
   
    
5. Insert the other end of the additional cord into the Power Supply Box
   
   
    

HDMI CORD
If your cord looks like the one below, you have a HDMI Cord. Follow the corresponding steps:

1. Insert one end of the HDMI Cord into the Power Supply Box
   
   
    
2. Insert the other end of the HDMI Cord into the back of the monitor
   
   
    

DISPLAY PORT
If your cord looks like the one below, you have a Display Port Cord. Follow the corresponding steps:

1. Insert one end of the Display Port Cord into the Power Supply Box
   
   
    
2. Insert the other end of the Display Port Cord into the back of your monitor
   
   

DVI CORD

If your cord looks like the one below, you have a DVI Cord. You will need an additional adapter to connect the universal dock and it will be sent to you. Follow the corresponding steps:

1. Remove the additional adapter out of the bag – they should look like the ones below
   
   
    
2. Insert one end of the DVI Cord into the empty side of the adapter (A rectangle with holes)
   
   
    
3. Insert the other end of the DVI Cord into the back of your monitor
   
   
    
4. Insert the other end of the additional adaptor into the Power Supply Box